Installing in Hotronic’s Heat-Ready Insoles

• Open Heating Element door found on bottom of Insole.
• Remove adhesive separating layer.
• Insert Heating Element with Power Cord facing up and aligned with channel.
• Remove adhesive cover layer on Heating Element.
• Close door pressing firmly on each side of Insole to set adhesive.
• Apply self-adhesive fabric cover strip over Heating Element door and Power Cord channel.
• Trim Insole to size as needed.

Return to Tutorial Videos

CAUTION: READ ALL INSTRUCTIONS PRIOR TO USING FOOTWARMER
CAUTION: USE OF FOOTWARMERS MAY RESULT IN BURNS